Strong Neodymium Magnetic Water Softener No Salt Water Treatment with two super strong 2x1x1" Neodymium Magnets
Strongest system we sell ! Fits up to 1.5-inch pipes
Double strength of MWS-1 with 2 in x 1 in x 1 in Neodymium Magnets
WORKS WITH ALL TYPES OF PIPE: STEEL, PVC, CAST IRON, STAINLESS STEEL , COPPER, BRASS.
Why buy the "Hydro-Soft" Magnetic Water Softener No Salt Water Treatment ?
Hydro-Soft Magnetic magnetic water softener no salt water treatment is made with a Epoxy+Nickel+Copper+Nickel quadruple-layer coating, the most effective coating against corrosion.
Epoxy+Nickel+Copper+Nickel quadruple-layer coating will last much longer than Nickel coating over time. Nickel coating will corrode over time and cause loss of magnet force.
We are the only manufacturer that makes a magnetic water softener no salt water treatment system using quadruple-layer coated high energy Neodymium magnets.
Hydro-Soft magnetic water softener no salt water treatment system is made with the most powerful rare earth neodymium magnets. We use high grade magnets which is the best and highest grade material used in magnetic water softener no salt water treatment systems on the market today.
Hydro-Soft magnetic water softener no salt water treatment devices are easily placed over the outside of any type of plastic or copper pipe.
We use high quality thicker steel back driver than our competitors' system to make the magnetic water treatment most effective.
Even a caveman can install “Hydro-Soft” magnetic water softener no salt water treatment devices…It’s sooo easy!
Built with the...Most Effective…Strongest.....Rare Earth Neodymium Magnets !
EPOXY coating for maximum corrosion resistance.
A very easy do-it yourself installation project that takes very little time & with no pipe cutting!
“Hydro-Soft” magnetic water softener no salt water treatment devices will not give you that slimy feeling in the shower that you get from a salt based water softener.
“Hydro-Soft” magnetic water softener no salt water treatment device is powered by high tech…high energy shielded neodymium magnetic fields and the flow of the water through your pipes. Not electricity!
The “Hydro-Soft” magnetic water softener no salt water treatment devices are effective on city and well water alike.
How does “Hydro-Soft” work?
As the picture shows... As water passes through our “Hydro-Soft” device...Water will be softened and magnetized.
Magnets we use in our “Hydro-Soft” magnetic water softener no salt water treatment:
There are two pieces of the large, strongest rare earth neodymium magnets for each magnetic water softener no salt water treatment. The rare earth neodymium magnets we use are extremely powerful. They are a lot stronger than normal Neodymium magnets used in other water softeners on the market today. We guarantee that our magnets are the highest quality, excellent, stable and have long lasting performance.
Pull Force: over 300 LBS, this system doubles the strength of MWS-1 and MWS-2 systems
Grade N42, high quality, ISO certified
Two strong 2x1x1" magnets per unit
Nickel+Copper+Nickel coating provides protection against moisture and oxygen but is prone to corrosion in salt and acidic conditions. Epoxy single layer coating does not protect magnets against moisture or oxygen but protect magnets from corrosion in salt and acidic conditions. The combination of Epoxy and Nickel+Copper+Nickel coating is the best solution against both corrosion in salt, acidic conditions and moisture, oxygen.
Coating: Epoxy+Nickel+Copper+Nickel quadruple-layer coating, the most effective coating against corrosion. Nickel coating used by our competitors will corrode over time and cause loss of magnet force.
We are the only manufacturer that makes the magnetic water softener no salt water treatment system using quadruple-layer coated high energy Neodymium magnets
About Hard Water:
Basically, water moves through the earth dissolving minerals, holding them in solution as salts, consisting mainly of calcium and magnesium. Most of these salts eventually deposit themselves as scale in your pipes, water heaters and other appliances which use water. Scale build-up is the result of a natural crystallization process which is accelerated by heating. The energy loss of trying to heat water through scale is substantial. A one-half inch thick layer of scale in your water heater will retard heat transfer by up to 70%.
Why are “Hydro-Soft” magnetic water softener no salt water treatment devices better than salt based water softeners?
* Super duty solid steel back driver quadruple the magnetic strength
* Requires No Salt and No Ongoing Expenses.
* Requires No Plumbing Modifications.
* Requires No Electricity.
* Maintenance Free.
* No Back Flushing & No Inconvenience.
* Completely Silent Operation.
* Requires No Water.
* Improves Water Flow and Pressure by Removing Scale Build-up From Inside Pipes and Appliances.
* Prevents and Removes Existing Lime and Scale Build-up.
* Does Not Corrode Water Heaters, Pipes, & Fixtures.
* Safe for Older Homes!
* Does Not Harm Our Environment or Our Fresh Water Supply.
* Feel Cleaner and Fresher After Bathing.
* Legal To Use In All Areas of The U.S.
* Safe For Heart Patients and Those With Hypertension.
* Take Applied Magnets Magnetic Water Softener No Salt Water Treatment Devices with You When You Move.
* Retains Healthful Minerals.
US Dept. of Energy report (32 pages!) about Non-Chemical Technologies in water treatment - a real eye-opener about speeding the adoption of energy-efficient and renewable technologies...
Click HERE for Federal Technology Report.pdf (307 Kb).
Installation Procedures for the Magnetic Water Softener Conditioners
Perform the following only when you are ready to install the unit on the pipe.
Install on incoming water line before the water heater.
CAUTION: These units are powerful and the magnets can cause serious injury or damage. Secure the units in place during installation. Watch your fingers here, these magnets are extremely strong and will pinch with amazing speed and force. Maintain a firm grip on both parts, keep the two magnets a minimum of 10 inches apart during installation or until the brackets are properly secured.
Remove the unit from the box, set this channel piece down away from tools or other metal objects. This unit comes with the hardware installed. You need to remove the outer nuts and magnet only, use extreme caution when the nuts are removed to keep the two pieces apart. A Minimum of 10 inches! Place the main frame around the pipe and center the magnets on the pipe. Align and adjust the inner nuts to properly fit around the pipe. Then re-install and tighten the two outer nuts.
These are NOT recommended for swimming pool water use!